====== Instalacija SVN servera (svnserve) ======

===== Instalacija =====

Da bi instalirali subversion paket moramo biti root korisnik
<code>su -</code>\\ 
Instaliranje subversion paketa
<code>yum install subversion</code>\\ 
Dodajvanje korisnika koji ce da koristi za pokretanje svn servera
<code>useradd svnserve</code>\\ 
Podesavanje lozinke
<code>passwd svnserve</code>
<code>
Changing password for user svnserve.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
</code>\\ 

===== Konfiguracija i kreiranje prvog projekta ===== 
 

Dalje nastavljamo kao svnserve korisnik
<code>su - svnserve</code>\\ 
Kreiranje repo direktorijuma
<code>mkdir repos</code>\\ 
Kreiranje projekata
<code>cd repos</code>
<code>svnadmin create -ime projeka-</code>
<code>cd -ime projeka-</code>\\ 
Podesavanje korisnickih naloga
<code>vi conf/passwd</code>
<file apache passwd>
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.

[users]
# harry = harryssecret
# sally = sallyssecret
korisnik = lozinka
</file>\\ 
Podesavanje projekta
<code>vi conf/svnserve.conf</code>
<file apache svnserve.conf>
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository.  (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)

### Visit http://subversion.tigris.org/ for more information.

[general]
### These options control access to the repository for unauthenticated
### and authenticated users.  Valid values are "write", "read",
### and "none".  The sample settings below are the defaults.
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file.  Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control.  Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file.  If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
# authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa.  The default realm
### is repository's uuid.
realm = Projekat ...

[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
</file>\\ 
Startovanje servera
<code>su -c "/usr/bin/svnserve --listen-port=-port- -d -r /home/svnserve/repos/" - svnserve</code>\\ 
Da bi se svnserve server automatski pokretao potrebno je da se doda sledeca naredba u **/etc/rc.local** fajlu
<code>vi /etc/rc.local</code>
<code>su -c "/usr/bin/svnserve --listen-port=-port- -d -r /home/svnserve/repos/" - svnserve</code>
//-port-// zameniti sa nekim proizvoljnim portom zbog sigurnosti\\ 

Inicijalni import projekta
<code>svn import .  -m 'Inicijlani import projekta ...' svn://-IP adresa servera ili domen- :-port-/-ime projeka-  --username=korisnik --password=lozinka</code>\\

===== Testiranje svnserve servera =====

Checkout projekta
<code>svn co svn://-IP adresa servera ili domen- :-port-/-ime projeka-  --username=korisnik --password=lozinka</code>\\ 
Dodavanje novog fajla
<code>cd -ime projeka-</code>
<code>echo "test" >> test.txt</code>
<code>svn add test.txt</code>
<code>svn commit test.txt -m 'Komentar ...'</code>\\ 
Komitovanje promene
<code>echo "opet test" >> test.txt</code>
<code>svn commit test.txt -m 'Komentar ...'</code>\\ 
Brisanje fajla
<code>svn delete test.txt</code>
<code>svn commit test.txt -m 'Komentar ...'</code>\\
Naravno uvek postoji laksi nacin rada sa svn-om :-) (http://tortoisesvn.tigris.org/)\\ 


===== Dodavanje novih projekata  =====
<code>su - svnserve</code>
<code>cd repos</code>
<code>svnadmin create -ime projeka-</code>
<code>cd -ime projeka-</code>\\ 

Podesavanje korisnickih naloga
<code>vi conf/passwd</code>

Podesavanje projekta
<code>vi conf/svnserve.conf</code>\\  

Restartovanje servera
<code>killall svnserve</code>

<code>su -c "/usr/bin/svnserve --listen-port=-port- -d -r /home/svnserve/repos/" - svnserve</code>\\ 

Nesto vise o svn komandama http://svnbook.red-bean.com/

[[aleksandar.atanasijevic| Povratak]]